The effect of severe plastic deformation on the Mg properties after CEC deformation B Sułkowski, M Janoska, G Boczkal, R Chulist, M Mroczkowski, P Pałka Journal of Magnesium and Alloys 8 (3), 761-768, 2020 | 44 | 2020 |
Influence of milling time on the crystallite size of AlSi5Cu2/SiC composite powder M Suśniak, P Pałka, J Karwan-Baczewska Archives of Metallurgy and Materials 61 (2B), 977-980, 2016 | 18 | 2016 |
The influence of powder characteristics on the sintering behaviour and impurity content of spark-plasma-sintered zirconium L Jaworska, J Panasiuk, P Putyra, M Stępień, P Noga, P Pałka, ... International Journal of Refractory Metals and Hard Materials 82, 259-267, 2019 | 14 | 2019 |
Effect of various SPD techniques on structure and superplastic deformation of two phase MgLiAl alloy J Dutkiewicz, P Bobrowski, S Rusz, O Hilser, TA Tański, W Borek, ... Metals and Materials International 24, 1077-1089, 2018 | 13 | 2018 |
Synthesis of Co–Pd alloys by co-electroreduction of aquachloro-cobalt (II) and palladium (II) complexes K Mech, G Boczkal, P Pałka, P Zabiński, R Kowalik Journal of Solid State Electrochemistry 18, 3121-3127, 2014 | 13 | 2014 |
The effect of chemical composition and thermal sprayed method on the chromium and tungsten carbides coatings microstructure MW Richert, B Mikulowski, P Palka, M Perek-Nowak Scientific Research Publishing, 2013 | 12 | 2013 |
Ag powders consolidated by reciprocating extrusion (CEC) MW Richert, J Richert, A Hotloś, P Pałka, W Pachla, M Perek-Nowak Materials Science Forum 667, 145-150, 2011 | 12 | 2011 |
The influence of additive technology on the quality of the surface layer and the strength structure of prosthetic crowns Ł Bojko, W RynieWicz, AM RynieWicz, M Kot, P Pałka Tribologia 280 (4), 13-22, 2018 | 9 | 2018 |
Deposition of W/aC: H: Zr and W/aC: H: W multilayer coatings on substrate made of porous graphite by arc–Electron beam hybrid method M Richert, P Zawadzka, A Mazurkiewicz, J Smolik, B Leszczyńska-Madej, ... Surface and Coatings Technology 300, 19-24, 2016 | 9 | 2016 |
The Cr3C2 thermal spray coating on Al-Si substrate M Richert, M Książek, B Leszczyńska-Madej, I Nejman, R Grzelka, ... Journal of Achievements in materials and Manufacturing Engineering 38 (1 …, 2010 | 9 | 2010 |
Identification of the cause of the stem neck fracture in the hip joint endoprosthesis AM Ryniewicz, A Ryniewicz, P Pałka, W Ryniewicz International Journal of Applied Mechanics and Engineering 23 (1), 223-234, 2018 | 8 | 2018 |
Tribological tests of the nanomaterials used to reconstruct molars and premolars with the application of the direct method W Ryniewicz, M Herman, AM Ryniewicz, Ł Bojko, P Pałka, A Ryniewicz, ... Tribologia 273 (3), 155-164, 2017 | 8 | 2017 |
Microstructural and strength studies Co-Cr-Mo alloy on prosthetic reconstructions in casting technology and laser sintering Ł Bojko, AM Ryniewicz, R Bogucki, P Pałka Przegląd elektrotechniczny 91, 29-32, 2015 | 8 | 2015 |
Microstructure characterization of chromium carbides coatings deposited by thermal spraying processes MW Richert, M Książek, P Pałka, S Wawrzyniak, R Grzelka, ... Journal of Achievements in Materials and Manufacturing Engineering 55, 108-112, 2012 | 7 | 2012 |
EXPERIMENTAL STUDIES OF A CHANGE OF DOMINANT SLIP SYSTEM IN TENSILE CU-6at.% Al SINGLE CRYSTALS MS Szczerba, P Pałka Archives of Metallurgy and Materials 54 (1), 2009 | 7 | 2009 |
The pressure compaction of Zr-Nb powder mixtures and selected properties of sintered and KOBO-extruded Zr-xNb materials L Jaworska, T Skrzekut, M Stępień, P Pałka, G Boczkal, A Zwoliński, ... Materials 14 (12), 3172, 2021 | 6 | 2021 |
Deformation behavior of AZ61 magnesium alloy systematically rolled and annealed at 450 C B Sułkowski, P Pałka Kovové Materiály 54 (3), 147-151, 2016 | 6 | 2016 |
SUPERPLASTIC DEFORMATION OF TWO PHASE MgLiAl ALLOY AFTER TCAP PRESSING. JM Dutkiewicz, S Rusz, D Kuc, O Hilser, P Pałka, G Boczkal Acta Metallurgica Slovaca 23 (3), 215-221, 2017 | 5 | 2017 |
Effect of Severe Plastic Deformation on Microstructure and Properties of Polycrystalline Aluminium Al99. 5 B Leszczyńska-Madej, P Pałka, M Richert Archives of Metallurgy and Materials 59 (1), 313-316, 2014 | 5 | 2014 |
Quantitative determination of a change of dominant slip system in tensile FCC single crystals MS Szczerba, P Pałka Journal of Physics: Conference Series 240 (1), 012129, 2010 | 5 | 2010 |