متابعة
Souad Harmand
Souad Harmand
Professor - Polytechnic University Hauts de France - LAMIH UMR CNRS 8201. France.
بريد إلكتروني تم التحقق منه على uphf.fr
عنوان
عدد مرات الاقتباسات
عدد مرات الاقتباسات
السنة
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
TH Tran, S Harmand, B Desmet, S Filangi
Applied thermal engineering 63 (2), 551-558, 2014
2712014
Experimental study of oil cooling systems for electric motors
T Davin, J Pellé, S Harmand, R Yu
Applied Thermal Engineering 75, 1-13, 2015
2032015
Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery
TH Tran, S Harmand, B Sahut
Journal of power sources 265, 262-272, 2014
1872014
Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components
S Gharbi, S Harmand, SB Jabrallah
Applied Thermal Engineering 87, 454-462, 2015
1852015
Effect of substrate temperature on pattern formation of nanoparticles from volatile drops
M Parsa, S Harmand, K Sefiane, M Bigerelle, R Deltombe
Langmuir 31 (11), 3354-3367, 2015
1612015
Mechanisms of pattern formation from dried sessile drops
M Parsa, S Harmand, K Sefiane
Advances in colloid and interface science 254, 22-47, 2018
1572018
Convective heat transfer inside a rotating cylinder with an axial air flow
S Seghir-Ouali, D Saury, S Harmand, O Phillipart, D Laloy
International journal of thermal sciences 45 (12), 1166-1178, 2006
1502006
Flash evaporation from a water pool: Influence of the liquid height and of the depressurization rate
D Saury, S Harmand, M Siroux
International Journal of Thermal Sciences 44 (10), 953-965, 2005
1472005
Experimental study of flash evaporation of a water film
D Saury, S Harmand, M Siroux
International Journal of Heat and Mass Transfer 45 (16), 3447-3457, 2002
1432002
Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet
S Harmand, J Pellé, S Poncet, IV Shevchuk
International Journal of Thermal Sciences 67, 1-30, 2013
1212013
Multiphysics modeling: Electro-vibro-acoustics and heat transfer of PWM-fed induction machines
J Le Besnerais, A Fasquelle, M Hecquet, J Pelle, V Lanfranchi, ...
IEEE Transactions on Industrial Electronics 57 (4), 1279-1287, 2009
922009
Heat transfer measurements in an opened rotor–stator system air-gap
J Pellé, S Harmand
Experimental thermal and fluid science 31 (3), 165-180, 2007
902007
Heat transfer study in a rotor–stator system air-gap with an axial inflow
J Pellé, S Harmand
Applied Thermal Engineering 29 (8-9), 1532-1543, 2009
762009
Transient cooling of electronic components by flat heat pipes
S Harmand, R Sonan, M Fakès, H Hassan
Applied Thermal Engineering 31 (11-12), 1877-1885, 2011
732011
Effect of wall-mounted V-baffle position in a turbulent flow through a channel: Analysis of best configuration for optimal heat transfer
Y Menni, A Azzi, AJ Chamkha, S Harmand
International Journal of Numerical Methods for Heat & Fluid Flow 29 (10 …, 2018
712018
Analysis of two-phase pressure drop fluctuations during micro-channel flow boiling
Y Wang, K Sefiane, Z Wang, S Harmand
International Journal of Heat and Mass Transfer 70, 353-362, 2014
702014
Natural convection heat transfer of nanofluids along a vertical plate embedded in porous medium
Z Uddin, S Harmand
Nanoscale research letters 8, 1-19, 2013
692013
Flow boiling in high-aspect ratio mini-and micro-channels with FC-72 and ethanol: Experimental results and heat transfer correlation assessments
Y Wang, K Sefiane, S Harmand
Experimental thermal and fluid science 36, 93-106, 2012
692012
Thermal optimization of a high-power salient-pole electrical machine
AS Bornschlegell, J Pelle, S Harmand, A Fasquelle, JP Corriou
IEEE Transactions on Industrial Electronics 60 (5), 1734-1746, 2012
632012
Local convective heat transfer for laminar and turbulent flow in a rotor-stator system
R Boutarfa, S Harmand
Experiments in fluids 38, 209-221, 2005
612005
يتعذر على النظام إجراء العملية في الوقت الحالي. عاود المحاولة لاحقًا.
مقالات 1–20