Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels JH Potgieter, PA Olubambi, L Cornish, CN Machio, ESM Sherif Corrosion Science 50 (9), 2572-2579, 2008 | 210 | 2008 |
The beneficial effect of ruthenium additions on the passivation of duplex stainless steel corrosion in sodium chloride solutions ESM Sherif, JH Potgieter, JD Comins, L Cornish, PA Olubambi, ... Corrosion Science 51 (6), 1364-1371, 2009 | 100 | 2009 |
The corrosion behaviour of WC-VC-Co hardmetals in acidic media DS Konadu, J Van Der Merwe, JH Potgieter, S Potgieter-Vermaak, ... Corrosion Science 52 (9), 3118-3125, 2010 | 87 | 2010 |
Performance of WC–VC–Co thermal spray coatings in abrasion and slurry erosion tests CN Machio, G Akdogan, MJ Witcomb, S Luyckx Wear 258 (1-4), 434-442, 2005 | 77 | 2005 |
Effects of minor additions of ruthenium on the passivation of duplex stainless-steel corrosion in concentrated hydrochloric acid solutions ESM Sherif, JH Potgieter, JD Comins, L Cornish, PA Olubambi, ... Journal of applied electrochemistry 39, 1385-1392, 2009 | 59 | 2009 |
Electrochemical corrosion of solid and liquid phase sintered silicon carbide in acidic and alkaline environments A Andrews, M Herrmann, M Sephton, C Machio, A Michaelis Journal of the European Ceramic Society 27 (5), 2127-2135, 2007 | 50 | 2007 |
Modelling and optimization of surface roughness during AISI P20 milling process using Taguchi method I Tlhabadira, IA Daniyan, R Machaka, C Machio, L Masu, LR VanStaden The International Journal of Advanced Manufacturing Technology 102, 3707-3718, 2019 | 49 | 2019 |
Characterization of WC–VC–Co thermal spray powders and coatings S Luyckx, CN Machio International Journal of Refractory Metals and Hard Materials 25 (1), 11-15, 2007 | 32 | 2007 |
Effect of process control agent (PCA) on the characteristics of mechanically alloyed Ti-Mg powders C Machio, HK Chikwanda, S Chikosha Journal of the South African Institute of Mining and Metallurgy 111 (3), 149, 2011 | 27 | 2011 |
Corrosion of WC-VC-Co hardmetal in neutral chloride containing media CN Machio, DS Konadu, JH Potgieter, S Potgieter-Vermaak, ... International Scholarly Research Notices 2013, 2013 | 24 | 2013 |
Characterization of mechanically alloyed fcc Ti–Mg-based powders C Machio, D Nyabadza, V Sibanda, HK Chikwanda Powder technology 207 (1-3), 387-395, 2011 | 22 | 2011 |
A comparison of the microstructures, thermal and mechanical properties of pressed and sintered Ti–Cu, Ti–Ni and Ti–Cu–Ni alloys intended for dental applications C Machio, MN Mathabathe, AS Bolokang Journal of Alloys and Compounds 848, 156494, 2020 | 21 | 2020 |
Consolidation of titanium hydride powders during the production of titanium PM parts: The effect of die wall lubricants C Machio, R Machaka, HK Chikwanda Materials & Design 90, 757-766, 2016 | 21 | 2016 |
Preparation, characterisation and testing of WC-VC-CO HP/HV of thermal spray coatings CN Machio | 10 | 2005 |
Analysis of the Cold Compaction Behaviour of TiH2-316L Nanocomposite Powder Blend Using Compaction Models C Machio, R Machaka, T Shabalala, HK Chikwanda Materials Science Forum 828, 121-128, 2015 | 9 | 2015 |
Mechanical alloying and sintering of Ti-10wt.% Mg powders C Machio, D Nyabadza, HK Chikwanda, M Phasha, VM Sibanda Materials Science Forum 618, 105-108, 2009 | 7 | 2009 |
Thermal analysis and morphology of the ball-milled Ti-Ni powder AS Bolokang, MN Mathabathe, C Mathebula, CN Machio Materials Today: Proceedings 38, 503-507, 2021 | 5 | 2021 |
A comparative study of oxygen pick-up of TiHDH powder during press and sinter and loose sintering processing TM Motsai, S Chikosha, C Machio, ME Makhatha IOP Conference Series: Materials Science and Engineering 430 (1), 012031, 2018 | 4 | 2018 |
A study of the machinability of Ti-6Al-4V compacted powders MT Tambani, C Machio, DM Madyira, EH Uheida, GA Oosthuizen IOP Conference Series: Materials Science and Engineering 430 (1), 012014, 2018 | 3 | 2018 |
Phase transformations during sintering of mechanically alloyed TiPt S Nxumalo, HK Chikwanda, CN Machio south African Institute of Mining and Metallurgy (SAIMM), 2010 | 2 | 2010 |